EITA&PAUL
INNOVATION
TM200HSC206DF
copy link
Back
TM200HSC206DF Counter module, Modicon M238 logic controller, 4 O discrete, 60 kHz, 2 spring terminal blocks
รหัสสินค้า
TM200HSC206DF
จำนวนสินค้า
สินค้าหมด
ค่าจัดส่ง
ไม่มีค่าจัดส่ง
฿18,500.00 (ส่วนลด 50%)
ราคา ฿9,250.00
รายละเอียดสินค้า
| Range of product | Modicon M238 logic controller |
|---|---|
| Product or component type | Counter module |
| Electrical connection | 2 spring terminal blocks |
| Number of modules | 3 counter modules per TM238 base |
|---|---|
| Discrete input number | 12 conforming to EN/IEC 61131-2 type 1 |
| Discrete output number | 4 |
| application specific I/O | Frequency generator Downcounting Frequency meter Upcounting Period measurement Axis following |
| Counting mode | 8 mode configurable |
| Counter inputs resolution | 31 bits + sign |
| Counting frequency | 60 kHz |
| Cycle time | 1 ms |
| Input compatibility | Incremental signal encoder with 15...30 V source outputs 2 and 3-wire sensors (24 V) |
| Type of cable | Shielded cable |
| Isolation between channels and internal logic | 1500 V for 1 minute |
| Discrete input type | Auxiliary input (IN_CAP terminals) Auxiliary input (IN_EN terminals) Auxiliary input (IN_REF terminals) High-speed (IN_A terminals) High-speed (IN_B terminals) High-speed (IN_SYNC terminals) |
| discrete input logic | Positive logic (sink) |
| Discrete input voltage | 24 V DC |
| Voltage state 1 guaranteed | 15...30 V |
| current state 1 guaranteed | 5 mA |
| Voltage state 0 guaranteed | <= 5 V |
| Current state 0 guaranteed | <= 0.5 mA |
| Discrete input current | 2 mA at 11 V |
| discrete output logic | Positive logic (source) |
| Discrete output voltage | 24 V DC 19.2...30 V |
| discrete output current | 0.5 A |
| Load current | 2 A per module 0.5 A per output |
| Response time on output | <= 200 µs energisation/de-energisation |
| Maximum leakage current | 0.1 mA at state 0 |
| Maximum voltage drop | <3 V at state 1 |
| Short-circuit protection | Automatic reset after disappearance of fault |
| Output overload protection | 0.5...1.5 A trip current with automatic reset after fault disappearance, per o/p |
| Fallback status | Faulty channel set to 0 Each channel held at its last value or set to the predefined value (0 or 1) |
| Load inductance | L = 0.5/I²F |
| Load capacitance | 50 µF |
| Local signalling | 1 display block |
| Current consumption | <= 100 mA at 24 V DC internal supply <= 100 mA at 5 V DC internal supply <= 2 A at 24 V DC external power supply |
| Mounting support | 35 mm symmetrical DIN rail |
| Unit Type of Package 1 | PCE |
|---|---|
| Number of Units in Package 1 | 1 |
| Package 1 Height | 8 cm |
| Package 1 Width | 10.5 cm |
| Package 1 Length | 12.5 cm |
| Package 1 Weight | 224 g |
| Unit Type of Package 2 | S02 |
| Number of Units in Package 2 | 20 |
| Package 2 Height | 15 cm |
| Package 2 Width | 30 cm |
| Package 2 Length | 40 cm |
| Package 2 Weight | 5.15 kg |
| Unit Type of Package 3 | S02 |
| Number of Units in Package 3 | 20 |
| Package 3 Height | 15 cm |
| Package 3 Width | 30 cm |
| Package 3 Length | 40 cm |
| Package 3 Weight | 5.15 kg |
| Warranty | 18 months |
|---|
