TM200HSC206DT
Back
TM200HSC206DT Counter module, Modicon M238 logic controller, 4 O discrete, 60 kHz, 2 screw terminal blocks
รหัสสินค้า
TM200HSC206DT
จำนวนสินค้า
สินค้าหมด
ค่าจัดส่ง
ไม่มีค่าจัดส่ง
฿18,500.00 (ส่วนลด 50%)
ราคา ฿9,250.00
รายละเอียดสินค้า
Range of product | Modicon M238 logic controller |
---|---|
Product or component type | Counter module |
Electrical connection | 2 screw terminal blocks |
Number of modules | 3 counter modules per TM238 base |
---|---|
Discrete input number | 12 conforming to EN/IEC 61131-2 type 1 |
Discrete output number | 4 |
application specific I/O | Upcounting Frequency meter Downcounting Axis following Frequency generator Period measurement |
Counting mode | 8 mode configurable |
Counter inputs resolution | 31 bits + sign |
Counting frequency | 60 kHz |
Cycle time | 1 ms |
Input compatibility | Incremental signal encoder with 15...30 V source outputs 2 and 3-wire sensors (24 V) |
Type of cable | Shielded cable |
Isolation between channels and internal logic | 1500 V for 1 minute |
Discrete input type | Auxiliary input (IN_CAP terminals) Auxiliary input (IN_EN terminals) Auxiliary input (IN_REF terminals) High-speed (IN_A terminals) High-speed (IN_B terminals) High-speed (IN_SYNC terminals) |
discrete input logic | Positive logic (sink) |
Discrete input voltage | 24 V DC |
Voltage state 1 guaranteed | 15...30 V |
current state 1 guaranteed | 5 mA |
Voltage state 0 guaranteed | <= 5 V |
Current state 0 guaranteed | <= 0.5 mA |
Discrete input current | 2 mA at 11 V |
discrete output logic | Positive logic (source) |
Discrete output voltage | 24 V DC 19.2...30 V |
discrete output current | 0.5 A |
Load current | 2 A per module 0.5 A per output |
Response time on output | <= 200 µs energisation/de-energisation |
Maximum leakage current | 0.1 mA at state 0 |
Maximum voltage drop | <3 V at state 1 |
Short-circuit protection | Automatic reset after disappearance of fault |
Output overload protection | 0.5...1.5 A trip current with automatic reset after fault disappearance, per o/p |
Fallback status | Each channel held at its last value or set to the predefined value (0 or 1) Faulty channel set to 0 |
Load inductance | L = 0.5/I²F |
Load capacitance | 50 µF |
Local signalling | 1 display block |
Current consumption | <= 100 mA at 24 V DC internal supply <= 100 mA at 5 V DC internal supply <= 2 A at 24 V DC external power supply |
Mounting support | 35 mm symmetrical DIN rail |
Unit Type of Package 1 | PCE |
---|---|
Number of Units in Package 1 | 1 |
Package 1 Height | 8.0 cm |
Package 1 Width | 10.5 cm |
Package 1 Length | 12.5 cm |
Package 1 Weight | 240.0 g |
Warranty | 18 months |
---|